Used GP11 single cylinder cone broken for sale

1. Equipment name: GP11 single cylinder cone broken

2. Equipment configuration: main machine, 132KW motor

3. Scope of application: mainly used in crushing industry such as mineral dressing plant, sand and stone factory, mixing station, etc

4. Applicable materials: gold ore, molybdenum ore, lead-zinc ore, silver-lead ore, copper ore, iron ore, pebble and other high hardness materials

5. Equipment usage:

This equipment was recovered by Luoyang Reichunhuan in a sand and stone factory in Hebei in 2017. After on-site evaluation, the overall wear of the equipment was not serious and there was no damage to major parts, so it was decided to recover it for remanufacturing. When the equipment returned to the factory, there was some sand and dust covering the outside, but the upper and lower frames were intact and the paint surface was also complete. After cleaning and splitting by technical personnel, unified detection is done. The test results are as follows: the main shaft is in good condition, the drive shaft is in good condition, the broken wall and the rolled mortar wall are in good condition, the distribution plate is worn, the beam lining plate is damaged, some of the frame bolts are aged, and the other parts are in good condition. According to the test results, the technical department gave the following maintenance plans: repair welding of the beam lining plate, replacement of the distribution plate, replacement of the bolt, etc. After the maintenance operation is completed, the equipment is tested and the results meet the service standards. Switch to the painting process for painting, into the area for sale.

6. Incoming material is 120mm, discharging material is 31.5mm, the output is 120t/h

7. Overall dimension: 2000X1700X2900mm