The machine was originally used in a sand and stone yard in Guangdong. It was dismantled for environmental protection reasons and then recycled by our company. In the production workshop of the company, the main machine is divided into parts, and then the
Service telephone:152-2543-9821
Enterprise email:luoyangruike@163.com
Original Manufacturer: Shanghai Duoling
Equipment model: HP300 cone crusher
Annex details: old motor 220KW, new oil station, new electric cabinet, new base
Manufacturer year: 2013
Feeding strength: ≤150mm
Production capacity: 150-180t/h (less than 28mm)
Equipment weight: 21t
The machine was originally used in a sand and stone yard in Guangdong. It was dismantled for environmental protection reasons and then recycled by our company. In the production workshop of the company, the main machine is divided into parts, and then the relevant sizes are checked one by one. The quality inspection personnel will issue the test report, and the technical center will issue the maintenance plan:
1. The copper sleeve of the main engine is worn and replaced
2. The contact surface of the movable cone is worn and the Angle is corrected. The mounting surface of movable cone is reprocessed after repair welding
3. The mounting surface of the support sleeve is worn and the Angle is corrected. The mounting surface of the support sleeve is reworked after repair welding
4. Disassemble the locking cylinder and releasing cylinder, and replace the seals
5. Oil pipe and connector should be renewed
6. Cut off the old guard and replace it with a new one
7. Check the motor is normal and replace the grease (oil).
8. Due to aging, the components of valves and electrical cabinets in oil stations do not move sensitively, which affects the stability of the mainframe equipment. In recent years, the technology of oil station and electric cabinet has made rapid progress. In order to further improve the stability and intelligence of equipment, the oil station and electric cabinet should be replaced with new ones.