Used 750X1060 jaw crusher for sale

1. Equipment name: 750X1060 jaw crusher

2. Scope of application: widely used in mining, smelting, building materials, highway, railway, water conservancy and chemical industries and other minerals and bulk materials of medium granularity crushing

3. Equipment configuration: jaw breaker and motor

4. Equipment:

The equipment is Luoyang Ruick cycle in March 2018 somewhere in the southeast of the sand and stone factory recycling, the overall state of the equipment recovery, no obvious wear. After returning to the factory, after cleaning, the technician will split it. After splitting, the size of each part will be detected and compared with the original size to understand the wear degree. After detection, it was found that the main shaft of the moving jaw is intact, the fixed jaw is intact, the frame is complete, the paint is off, the inner hole of the bearing seat of the moving jaw is worn, the flywheel and the pulley are intact, and the rest of the parts are also in the normal size range. According to the above situation, the maintenance plan is as follows: repair welding of the inner hole of the bearing seat, processing, reprocessing of the frame painting, replacement of the oil seal and lubrication. After maintenance, the machine will be assembled and tested, and it will reach the factory standard after being inspected by quality inspection personnel.

5. Feeding particle size: ≤640mm

6. Inlet size: 1060x750mm

7 discharging port size: 65~200mm

8. Processing capacity: 90~310/h

9. Power: 130/KW