Used ASJ-42-30 jaw crusher of Luoyang Dahua for sa

1. Equipment name: ASJ-42-30 jaw crusher of Luoyang Dahua Heavy Industry Co., Ltd

2. Scope of application: widely used in mining, smelting, building materials, highway, railway, water conservancy and chemical industries and other minerals and bulk materials of medium granularity crushing

3. Equipment configuration: jaw breaker and motor

4. Equipment:

This equipment was produced in 2012, due to environmental reasons idle. In November 2017, it was acquired and restored in Jingyang, Shaanxi Province by Luoyang Reich Circulation Company. When the equipment is recovered, the paint surface is worn and the overall appearance is good. Upon inspection, it was found that the fuselage was in good condition, the movable jaw was in good condition, the fixed jaw plate was slightly worn, the supporting bearing was old, the inner hole of the flywheel was slightly worn, the eccentric shaft was in good condition, the side guard plate was in good condition, the return spring was in good condition, and the gap adjusting screw was in good condition. After analysis by the technicians, the following repair schemes are obtained: replace the bearing, repair the inner hole of the pulley, replace the jaw plate, and restore the hydraulic adjustment device. After the repair of the jaw crusher after the test machine, good performance.

5. Spray paint again, and deliver accessories according to new products

6. The used equipment sold after Luoyang Ruike cycle repair enjoys a half-year warranty

7. Specifications and parameters: feeding particle size range 600x800x1000mm

8. Feeding port size: 1070X760mm

9. Processing capacity :215-420t/h

10. Power: 110/KW