The equipment was used for crushing pebbles in a sand and stone factory in Henan Province before. Due to environmental protection reasons, it was only used for less than 20 hours and then parked on the construction production line, basically in a new stat
Service telephone:152-2543-9821
Enterprise email:luoyangruike@163.com
1. Equipment name: Luoyang Dahua PLS-850 sand making machine
2. Equipment configuration: two 90KW motors and one main machine
3. Equipment situation
The equipment was used for crushing pebbles in a sand and stone factory in Henan Province before. Due to environmental protection reasons, it was only used for less than 20 hours and then parked on the construction production line, basically in a new state. After that, the sales manager of our company found and recovered it, and it was overhauled and maintained by our Luoyang Reich recycling remanufacturing company. The equipment was disassembled and found that the frame was not cracked and deformed, and the hammer head and the counter plate were not worn. The equipment bearing is in good condition, there is no oil leakage at the lower end of the spindle, the impeller has been static balanced, the core parts are overhauled and tested successfully, and the appearance is repolished and sprayed with paint.
4. Scope of application
Widely used in refractories, abrasive ceramic raw materials, building materials and highway industries, such as minerals, rock crushing operations Especially for medium hard, extra hard or abrasive materials
5. Technical parameters
1) Feed size range: ≤50mm
2) discharging particle size range: ≤5mm
3) Production capacity: 120-300t/h
4) Spindle speed: 1570-1795t/h
5) Motor power: 90KW×2